| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description
Overview
CURTIS Model: 1228-2430
Norminal Battery Voltage (Volts): 24V
15 Second Current Rating (amps): 70
1 Minute Current Rating (amps): 70
1 Hour Current Rating (amps): 35
Minimum motor resistance: 200 mΩ
B+, B- logic pin current (max.): 9 A (pins 1, 2 and 10, 11 on 18-pin connector)
KSI input current (typical): 50 mA without programmer; 150 mA with programmer
KSI input current (peak): 1.5 A
Logic input current (typical): 1 mA at 24 V
Horn output current (max.): 15 mA
BDI output voltage and current (max.): 0-5 V, 2 mA
LED output current (max.): 15 mA
Electromagnetic brake coil resistance (min.): 32-200 Ω
Throttle Type: By default, the Throttle Type of controller 1228-2430 is set as Type "0". The controller 1228-2430 can be programmed to accept single-ended, wigwag, or inverted wigwag signals from a 5kΩ, 3-wire pot or from a 5V throttle. The throttle input signal type options (Types "0" through "5" in the Throttle Type programming menu) are listed as below:
0 = wigwag pot or voltage throttle
1 = inverted wigwag pot or voltage throttle
2 = single-ended pot; maximum speed = 5kΩ
3 = inverted single-ended pot; maximum speed = 0
4 = single-ended voltage throttle; maximum speed = 5V
5 = inverted single-ended voltage throttle; maximum speed = 0
PWM operating frequency: 15 kHz
Electrical isolation to heatsink (min.): 500 VAC
Dielectric resistance: >1 MΩ (DC test)
Heatsink overtemperature: linear cutback starts at 92°C; complete cutoff at 134°C
Heatsink undertemperature: 50% armature current at -25°
Undervoltage cutoff: 14 V
Overvoltage cutoff: 34 V
Our Factory
Contact US
){kind=link}