CURTIS Programmable DC Series Motor Controller 1219-8406 (HELI DQKC-025)36 - 48V / 600A
Specifications:
- PWM operating frequency: 15 kHz
- Electrical isolation to heatsink (min.): 500 VAC
- KSI input voltage: 16-45V
- KSI input current (no contactors engaged):
- 80 mA without programmer
- 130 mA with programmer
- Logic input current: < 2 mA
- Status LED output current (max.): < 2 mA
- Operating ambient temperature range: -40°C to 50°C
- Storage ambient temperature range: -40°C to 85°C
CURTIS had stopped the production of 1219-8406.
This current 1219-8406 DC Series Motor controller is a product of a Chinese manufacturer. With same dimensions and functions of the original products, this 1219-8406 can also be programmed by CURTIS Model 1313-4331 Handheld Programmer or CURTIS 1314 PC programming station.
We offer 12-month warranty for item sold, counting from the date of delivery.
|
Notice: For the buyer without CONTROLLER APPLYING EXPERIENCE, please consult your cart/motor dealer and read carefully the CURTIS 1214/15/19-8 Manual before making the purchase.
Notice: By default, we will deliver the controller with default setting of 36-48V / 600A / 0-5kΩ (throttle type "3"). For better applying the controller to your system, the buyer should confirm with the seller the battery system voltage and the throttle type (0-5kΩ, 5k-0Ω or 0 - 5V, etc). If you need to modify any controller parameter, please leave us a message while you make the purchase. There is no extra cost for reprogramming the controller. |
|
Overview:
CURTIS 1219-8406 programmable motor speed controllers provide efficient, cost-effective, and simple-to-install control for a variety of large industrial vehicles. Typical applications include walkie/rider pallet trucks, fork lifts, stackers, reach trucks, and other industrial trucks. The 1207-based microprocessor logic section combined with a CURTIS MOSFET power section gives the 1219-8406 controller high power and advanced features in a rugged, compact package.
1219-8406 controllers are flexible in variable applications, with the added functionality of being programmable-via the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station. This means the controllers can be tailored to the needs of specific applications. In addition to configuration flexibility, use of the programmer offers diagnostic and test capability. |
|
Key Features:
- CURTIS Model: 1219-8406 (HELI forklift controller model: DQKC-025)
- Norminal Battery Voltage (Volts): wide working voltage 36 - 48V
- 2 Minute Current Rating (amps): 600
- Under Voltage Cutback (Volts): 21V
- Contactor Voltage (Volts): battery voltage
- Throttle Type: 0-5K Ω (throttle type "3", default setting), flexible throttle circuitry accommodates a variety of throttle types: 5kΩ-0, 0-5kΩ, 0-5V, 0-10V, inductive, Hall, etc.
- Ambient Operating Temperature Range: -40°C to 50°C
- Heatsink Overtemperature Cutback: 85°C
- Heatsink Undertemperature Cutback: -25°C
- Dimensions: L309xW180xH82 mm
- Net Weight: about 4.5 kg
|
|
Features Include:
- Power MOSFET design, providing
- infinitely variable drive and plug brake control
- silent high-frequency operation
- high efficiency (for reduced motor and battery losses)
- Overvoltage and undervoltage protection
- Thermal protection/compensation circuitry that provides undertemperature cutback, constant current limit over operating range, and linear rollback in overtemperature-thus preventing sudden power loss regardless of thermal conditions
- Diagnostic and test information for the controller-and other system components-readily available through both an on-board LED and the optional handheld programmer
- Meets or exceeds EEC fault detect requirements, with circuitry and software to detect faults in the throttle circuit, MOSFET drive circuits, MOSFET output, contactor drivers, and contactors
- Programmable input sequencing options include several combinations of neutral start and static return to off (SRO)
- Arcless contactor switching with microprocessor-controlled contactor sequencing
- Smooth, controlled plug braking-with either variable (throttledependent) or fixed plug current limit
- Neutral braking option provides automatic plug braking in neutral
- MultiMode™ input selects between two different operating modes, thus allowing optimization of vehicle characteristics for different driving conditions
- Emergency reverse (belly button switch) provides full function with a single input
- Anti-rollback (ramp start) provides full power for starting on ramps
- Simple contactor and switch wiring, with coil drivers monitored for shorts and open circuits-thus ensuring fail-safe operation
- Flexible throttle circuitry accommodates a variety of throttle types: 5kΩ-0, 0-5kΩ, 0-5V, 0-10V, inductive, Hall, etc.
- Programmable "ramp shape" (static throttle map) provides flexibility in selecting throttle response feel
- Sealed package, providing environmental protection
- Power connections made by tin-plated solid copper busses, with a polarized Molex connector for control signals
- Easily programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station.
- Rugged anodized aluminum extruded housing meets IP65 environmental sealing standards for use in harsh environments.
|
FAQ
Q1. Can I have a sample order?
A: yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 3-5 days.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less
than 0.2%
Certifications
Package:Normally we use the standard exporting packaging. We also can according to clients' request .
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperating.
2. By Air: Delivery from the Shanghai airport to customer's destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
Audited Supplier 
){kind=link}
){kind=link}