Customization: | Available |
---|---|
Task: | Program |
Structure: | Closed-Loop |
Still deciding? Get samples of US$ 65/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Notice: For the buyer without CONTROLLER APPLYING EXPERIENCE, please consult your cart/motor dealer and read carefully the CURTIS
1212&1212P Controller Manual before making the purchase.
If you need to modify any controller parameter, please send us a message with the list of parameters to be modified (Click here to
download the parameter list of default setting of controller 1212P-2501 & 1212P-2502, PDF format).
In our database, we have saved 1212P-2501 controller programs for different pallet trucks and forklifts, EP / ZL, RUYI / XILIN,
VOLOX, Landpull / Zhongchuang, Noblelift, Cheuk's, MIMA, etc. If you are going to replace an old controller, you may send us a
message for telling the old controller's model. We may check our database for knowing if we have its program. For more details,
please contact us.
Overview:
The 1212P-2501 is designed for use in low power DME applications such as micro-scooters, mini-scooters, foldable scooters, and
low-end personal mobility vehicles. Although it is optimized for use on modern 3-wheel and 4-wheel mobility aid scooters, its
programmable options also allow it to be used on any low power permanent magnet motor application.
The 1212P-2501 controller is fully programmable, via the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station
. This means the controllers can be tailored to the needs of specific applications. In addition to configuration flexibility, use
of the programmer offers diagnostic and test capability.
Key Features:
* CURTIS Model: 1212P-2501/1212P-2502
* Norminal Battery Voltage (Volts): 24V
* 20 Second Current Rating (amps): 90
* 2 Minute Current Rating (amps): 50
* 1 Hour Current Rating (amps): 20
* Peak Boost Current (amps): 90
* Max Boost Current Duration: 10 Second
* Minimum motor resistance: 120 mΩ
* B+, B- logic pin current (max.): 9 A (pins 7 and 13 on 14-pin connector)
* KSI input current (typical): 80 mA
* Logic input current (typical): 1 mA
* Horn output current (max.): 15 mA
* BDI output voltage, resistance (max.): 0-5 V, 10 kΩ
* LED output current (max.): 15 mA
* Electromagnetic brake coil resistance (min.): 32 Ω
* PWM operating frequency: 15.6 kHz
* Electrical isolation to heatsink (min.): 500 VAC
* Heatsink overtemperature: linear cutback starts at 80°C; complete cutoff at 105°C
* Heatsink undertemperature: cutback starts at -10°C; and is reduced linearly to 50% at -25°
* Undervoltage cutoff: 14 V
* Overvoltage cutoff: 34 V
* Throttle Type: By default, the Throttle Type of controller 1212P-2501 is set as Type 7 (7 = single-ended; neutral when wiper ≤
PotLow). The 1212P-2501 controller can accept inputs from both 5kΩ, 3-wire pot throttles and voltage throttles. Set the
throttle type parameter to match the throttle used in your application. * 5kΩ, 3-wire pot throttles: * 0 = wigwag
* 1 = inverted wigwag
* 2 = single-ended; neutral when wiper at PotLow
* 3 = inverted single-ended; neutral when wiper at PotHigh
* 4 = unipolar
* Voltage throttles
* 5 = wigwag6 = inverted wigwag7 = single-ended; neutral when wiper ≤ PotLow8 = inverted single-ended voltage; neutral when
wiper ≥ PotHigh9 = unipolar
* Dimensions: W72xL131xH39 mm
* Net Weight: 0.3 kg
Certification pending
* Operating ambient temperature range: -25°C to 50°C
* Storage ambient temperature range: -40°C to 65°C
* Package environmental rating: ISTA 2A; electronics sealed to IPX5
Features Include:
* Advanced speed regulation maintains precise speed over varied terrain, obstacles, curbs, and ramps
* Linear cutback of current ensures smooth control, with no sudden loss of power during undervoltage or overtemperature
* Optional speed limit potentiometer provides direct and linear control of the maximum vehicle speed
* Proprietary algorithms help prevent gearbox wear while providing smooth starts and reversals
* The vehicle is brought to a complete stop before the electromagnetic brake is applied, ensuring safe and secure stops under all
conditions
* Charger inhibit input prevents driving while charger is attached
* Key Off Decel function ensures a smooth "brake to stop" when the key is turned off while driving or when a fault occurs that
requires the vehicle to stop
* Anti-Rollback/Roll-forward function provides smooth and safe vehicle control on hills and ramps
* Internal main contactor provides secure power-off
* Boost current gives a brief boost of current greatly improving transient loads such as starting on a hill, crossing thresholds,
etc.
* Easily programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station.
Q1.Can I have a sample order?
A: yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 3-5 days.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less than 0.2%