| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Type: | Controller |
| Curtis Model: | 1268-5403 |
| Norminal Battery Voltage: | 36V 48V |
| Amature 2 Minute Current Rating: | 400A |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Product Description
CURTIS 1268 controllers are separately excited motor speed controllers designed for use in a variety of transport vehicles. These programmable controllers are simple to install, efficient, and cost effective. Typical applications include heavy-duty golf carts, personnel transports, burden carriers, and other utility vehicles.
The 1268 controller offers smooth, silent, cost effective control of motor speed and torque. The speed sensor input allows superior closed-loop control for regulating vehicle speed. Unique braking parameters allow simple, intuitive deceleration tuning. A full-bridge field winding control stage is combined with a half-bridge armature power stage to provide solid state motor reversing and regenerative braking power without additional relays or contactors.
Specifications:
Proposed SepEx motor power rate:
36V system: ≤ 5 kW
48V system: ≤ 6.3 kW
simple motor connecting labels on assemblage
easy installation with components mounted on a heat-sink aluminium alloy installation plate
foot pedal accelerator (throttle), pre-wired for assemblage
simple plug-in connctors
This 1268-5403 controller assemblage is a completed electric vehicle DC Series Motor control system. The assemblage includes:
controller
main contactor
fuses
wiring
heat-sink aluminium alloy installation plate
foot pedal accelerator (0-5V throttle)
plug-in connectors
installation (bolts, washes and nuts) kit Included
Key features:
CURTIS Model: 1268-5403
Norminal Battery Voltage (Volts): 48V (default setting) or 36V
Amarture 2 Minute Current Rating (amps): 400
Field 2 Minute Current Rating (amps): 50
PWM operating frequency: 16 kHz
Electrical isolation to heatsink: 500 V ac (minimum)
Aluminum alloy installation panel size:
L300 mm x W231 mm x H8 mm
Installation dimensions (holes): 280 mm x 210 mm
Assemblage Net Weight: 7.8 kg (with throttle)
Package Weight: 9 kg (reinforced carton package, safe for international delivery)
Features include:
Regenerative braking, providing longer operation on a single battery charge and reducing motor brush wear and motor heating
Adjustable brake rates, for smooth pedal-release braking
Two user-selectable vehicle operating personalities, with vehicle top speed controlled and limited in each mode
Motor parameters are programmable to match the characteristics of the specific motor being used
Vehicle speed control is enhanced through feedback from a Hall effect speed sensor
Anti-rollback function, providing improved control when throttle is released on hills
Anti-stall function helps prevent motor commutator damage
High pedal disable (HPD) and static return to off (SRO) interlocks prevent vehicle runaway at startup
WalkAway™ braking feature limits any stopped or key-off rolling to a very low speed
Auxiliary driver can be programmed for either an electromagnetic (EM) brake or a WalkAway™ relay
Coil driver provides adjustable pull-in and holding voltages to WalkAway™ relay or EM brake
Driver for brake lamp relay can be used to power external lights during braking
Reverse signal driver provides a low signal any time the vehicle is traveling in reverse
Driver outputs are short circuit protected and provide built-in coil spike protection
Warning buzzer sounds steady in reverse, intermittent during WalkAway™ braking
Complete diagnostics through any of the optional programmers and through the built-in Status LED
Driver for remote Status LED enables status information to be available at a dashboard
Sealed package is rated at IP64 and IP67
Meets or exceeds EEC fault detect requirements.
Our Factory
Contact US
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}