Mute startup variable speed electric precise vector torque ac motor controller Curtis 1236-5401 36/48V 350A
Specifications:
- PWM operating frequency: 15 kHz
- Electrical isolation to heatsink (min.): 500 VAC
- PWM operating frequency: 10 kHz
- Maximum encoder frequency: 15 kHz
- Maximum controller output frequency: 300 Hz
- Heatsink overtemperature cutoff: linear cutback starts at 85°C; complete cutoff at 95°C
- Heatsink undertemperature cutoff: complete cutoff at -40°C
Key Features:
- CURTIS Model: 1236-5401
- Nominal input voltage: 48V (default setting) or 36V
- 2 Minute RMS Current Rating (amps): 450
- S2-60 Minute RMS Current Rating (amps): 205
- MOSFET overtemperature cutback: linear cutback starts at 100°C; complete cutoff at 110°C
- MOSFET undertemperature cutback: approx. 50% motor current at -25°C; complete cutoff at -40°C
- All low power connections are made through a single 35-pin AMPSEAL connector
- Throttle Type: 0-5K Ω (default setting), flexible throttle circuitry accommodates a variety of throttle types: 5kΩ-0, 0-5kΩ, 0-5V, etc.
- Operating Ambient Temperature Range: -40°C to 50°C
- Internal Heatsink Operating Temperature Range: -40°C to 95°C
- Storage Ambient Temperature Range: -40°C to 95°C
- Package environmental rating: IP65
- Dimensions: L232xW165xH85 mm
- Net Weight: 4.35 kg
Features Include:
- Increased Performance, Improved functionality
- Higher performance form, fit and functional replacements for earlier CURTIS Model 1236E AC controllers.
- CE marked as a programmable safety device under EN ISO 13849-1.
- Models available for 450 output at 36-48V system voltages. These are true 2 minute RMS ratings, not short duration 'boost' ratings.
- Enhanced 64MHz micro and additional FLASH memory doubles the available VCL code space and provides more than twice the VCL execution speed.
- Six additional VCL-configurable CAN "mailboxes" significantly increases CAN master capabilities.
- Advanced Pulse Width Modulation techniques produce low motor harmonics, low torque ripple and minimized heating losses, resulting in high efficiency.
- Unmatched Flexibility
- Easily programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station.
- Programmable for either traction or pump applications.
- Field upgradeable software.
- Integrated Battery state-of-charge algorithm and hour meter.
- Fully-featured generic software and VCL for typical Warehouse Truck applications is included.
- Comprehensive programming options and VCL allow other applications to be easily supported.
- CURTIS hand-held or PC Windows programming tools provide easy programming and powerful system diagnostic tools.
- Integrated status LED provides instant diagnostic indication.
- Robust Safety and Reliability
- Dual Microprocessor architecture cross-checks critical circuits, logic, and software functions to ensure the highest possible functional safety performance level is achieved.
- Insulated Metal Substrate power base provides superior heat transfer for increased reliability.
- Fail-Safe power component design.
- Reverse polarity protection on battery connections.
- Short circuit protection on all output drivers.
- Thermal cutback, warning, and automatic shutdown provide protection to motor and controller.
- Rugged sealed housing and connectors meet IP65 environmental sealing standards for use in harsh environments.
- Meets or complies with relevant US and International Regulations
- EMC: Designed to the requirements of EN12895.
- Safety: Designed to the requirements of:
- EN1175-1:1998+A1:2010
- EN (ISO) 13849-1
- IP65 Rated per IEC 60529.
- UL recognized per UL583.
Our Company
Hefei Huanxin Technology Development Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004. We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We have achieved great improvement since our company was founded in 2004. We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.
On Exhibition
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Samples arrived often need 3-5 days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. How to proceed an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.
Q6. Is it acceptable to print my logo on the product?
A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer one-year warranty for our products.
Q8: How to deal with the flaw?
A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%.
Certifications
Packing & Delivery
Package:Normally we use the standard exporting packaging. We also can according to clients' request .
Shipping :
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier we are co-operating at present.
2. By Air: Delivery from the Shanghai airport to customers' destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
Contact me:
Audited Supplier 
){kind=link}
){kind=link}